Home >> October 2015 Edition >> In-Space Trucking With VASIMR® Engines
In-Space Trucking With VASIMR® Engines
By Dr. Mark Carter, Senior Vice President for Technology Development, Ad Astra Rocket Company

 

Throughout history, improved logistics have been needed to conquer new frontiers.

The frontier of space will be no different. Advanced in-space propulsion capabilities are needed now to cost effectively increase the mass of new payloads destined for high orbits and to enable the remote servicing of previously positioned assets.

Traditional chemical rockets are not practical for satellites to evolve into maintainable units that can be routinely refueled, repaired, upgraded or repositioned autonomously. Enhanced cargo delivery and resupply capabilities are also needed to sustainably expand our horizon for human exploration beyond Low Earth Orbit (LEO).

A new “in-space trucking industry” will emerge when powerful electric vehicles are developed to efficiently use the recent advances in solar arrays for space. Variable Specific Impulse Magneto-plasma Rocket (VASIMR®) engines will push those trucks in space much in the same way that powerful diesel engines are used for ground-based logistics.

A VASIMR® engine provides steady-state thrust using an electrical power source to create a directed plasma jet. VASIMR® technology is much different from other electric propulsion systems based on the familiar Hall or ion engines.

Instead of using a direct current bias, VASIMR® engines ionize the propellant and accelerate the resulting plasma using Radio Frequency (RF) waves. These waves couple power into naturally occurring resonant modes that heat the magnetized plasma to temperatures of millions of degrees, comparable to interior regions of the sun. The strong magnetic fields in the VASIMR® design protect material surfaces from these temperatures. 

The very high temperatures in the VASIMR® plasma produce jet exhaust velocities more than ten times higher than the best liquid hydrogen-oxygen engines available today. This high specific impulse allows orbital maneuvers using one-tenth the propellant that would otherwise be needed using chemical engines.

With those high exhaust speeds, the propellant mass no longer dominates the total mass of the spacecraft. Entirely new options become available to solve orbital mechanical problems.

In contrast with chemical propulsion, the power source for a VASIMR® engine is also completely independent of the propellant. This independence makes power available for non-propulsive purposes and allows complete reuse of power and propulsion assets with only chemically inert propellant needed for resupply.

The VASIMR® engine somewhat uniquely allows its specific impulse and thrust to be tuned over a wide range, while maintaining a constant input power. This capability allows mission flexibility during operation.

The specific impulse range can also be tailored to support a particular mission by selecting the propellant from a variety of materials without significant changes in the technology. A propellant with lighter ion mass results in a higher range of specific impulse with lower thrust, while heavier ions provide a lower range of specific impulse with higher thrust.

For example, argon or krypton stored at mildly cryogenic temperatures (argon freezes below 83 K, krypton below 115 K) provide excellent performance with specific impulse ranging from 2500 s to more than
5000 s. Xenon can also be used for propellant if very low specific impulse and high thrust is required, but xenon is typically a poor choice for VASIMR® engines because Xenon is expensive and requires more powerful magnetic fields than lighter gases.

Possible alternatives without cryogenic storage include iodine substituting for xenon and bromine substituting for krypton. Other compounds that provide lighter propellant ion mass, such as ammonia or water, may also serve as possible propellants.

The High-Power Regime
VASIMR® engines occupy the high-power niche for electric propulsion. A convenient way to visualize the natural power regimes for VASIMR® and Hall technologies is to plot the ratio of total propulsion mass to jet power versus the jet power required to accomplish the mission.

The comparison must account for the total mass of the propulsion system, including the solar electric power plant, the power processing unit and the thruster itself. The goal is, of course, to reduce the overall propulsion system mass as much as possible.

By assuming the same specific impulse for both systems and the same weight for the solar array, the salient features of the two technologies can be assessed side-by-side and favorable power regimes for each can be readily identified.

The figure at the right reveals that different technologies have advantages in different power regimes. The controlling physics behind each technology is responsible for this difference.

Hall technology uses a weakly magnetized direct current discharge with space-charge limitations on density and power. VASIMR® technology exploits naturally occurring resonant behavior in a strongly magnetized plasma with no space-charge limits.

The technological trade-off is the investment required for a strong magnet to handle VASIMR® power levels. With present-day magnet technology, a Hall system has an advantage for power levels well below 50 kW, but above 50 kW, the VASIMR® system is clearly the better choice.

This transition to the VASIMR® power regime will shift to lower values of power as the thin-film technology supporting high-temperature superconducting magnets continues to improve. The mass of the solar electric power plant, assumed here to be 7 kg/kW, will also begin to dominate the total mass of the propulsion system as magnet technology improves and as power levels increase.

VASIMR® technology has additional operational advantages. One is its very high power-to-thrust conversion efficiency, which allows more than 65 percent of the solar electric power to be converted into thrust-producing jet power.

Other advantages are the absence of any direct current bias and the nearly linear behavior of the underlying RF wave physics. These attributes minimize coupling between the plasma, the RF power processing units, the solar arrays, and other parts of the vehicle.

The RF power processing units are also straightforward and robust, using extremely efficient field-effect transistor technologies widely utilized throughout the commercial broadcast industry. Additional information regarding the VASIMR® mass scaling may be found at:

http://adastrarocket.com/infographics/VASIMR-Hall-Power-Niches-07-03-14.pdf
http://www.adastrarocket.com/IEPC13-149_JPSquire_submit.pdf
http://www.adastrarocket.com/Jared-Space2014.pdf

Orbital Debris Removal
A demonstration of the mission capabilities enabled by solar electric propulsion in the VASIMR® power regime is the removal of orbital debris; specifically, the spent upper stages jettisoned in multiple orbit planes during the long history of satellite launches to polar orbit. Mathematical tools for the traveling salesman problem were used to optimize the specific impulse for a mission while minimizing mission time and propellant usage for a solar electric tug equipped with a 200 kW VASIMR® engine. 

The resulting concept was able to capture 19 known Zenit rocket upper stages and de-orbit them in a controlled manner over the Pacific Ocean. Each Zenit upper stage is large, approximately 4 m in diameter, 10 m long, and weighs approximately 8 tons.

The concept outfits the electric propulsion tug with a specialized service module containing a tray holding 20 solid rocket motors and a detachable chemical robotic pod. The tug, with service module, climbs to the altitude of a drifting Zenit, approximately 800 km, and positions itself at a safe distance from the debris.

The chemical robotic pod then detaches, carrying a solid rocket motor with it, to perform the proximity operations needed to stabilize the Zenit. The pod attaches the solid rocket motor to the Zenit’s exhaust nozzle and tows the now cooperative Zenit back to berth and locks onto the solar electric tug.

The tug’s VASIMR® engine is then used to efficiently lower the orbit of the Zenit to approximately 400 km, a location from which the implanted solid rocket motor can detach and complete the controlled atmospheric reentry of the Zenit into the Pacific. The VASIMR® engine then repositions the tug with its service module at the next Zenit upper stage and the de-orbiting process is repeated 18 more times before the VASIMR® engine requires a resupply of propellant from the ground. Alternative scenarios could park the Zenit upper stages in safer orbit locations.

The optimum specific impulse range for the debris de-orbiting mission was found to be between 4,500 and 5,000 seconds, well suited for a VASIMR® engine operating with low-cost argon propellant. Lower specific impulse cases resulted in a substantial increase in the initial mass of propellant launched to Low Earth Orbit for the mission, which dramatically increases the time and overall cost of the mission.

The high performance of a VASIMR® engine for this application makes the debris removal both faster and less expensive than with other electric propulsion technologies.  For more information, read http://adastrarocket.com/infographics/VASIMR-Orbital-Cleaner.pdf or watch the video at http://www.adastrarocket.com/aarc/media-and-gallery.

VASIMR® Engine Development Status
Since the company’s inception in 2005, Ad Astra Rocket Company has advanced the Technical Readiness Level (TRL) of the VASIMR® engine almost exclusively with private funding. In 2013, after more than $30 million in private capital investment, the company completed more than 10,000 successful high power firings of its most advanced VASIMR® prototype, the VX- 200™, in Ad Astra’s Houston vacuum chamber facility.

These tests with argon propellant demonstrated the engine’s excellent firing repeatability and performance (6 N thrust, 5000 s specific impulse, and a thruster efficiency greater than 70 percent) with no measurable signs of engine wear. To optimize company resources at the time, these earlier tests were all of short duration, less than 1 minute, but sufficient to reliably establish the rocket’s performance and measure thermal loads.

Technical information about Ad Astra’s VX-200 experiment performance is available at:
http://www.adastrarocket.com/Ben-JPP-2014.pdf

Ad Astra Rocket Company was recently selected by NASA as one of the winners of its Next Space Technologies for Exploration Partnerships (NextSTEP). Authorization to proceed was granted on August 7, 2015, and work is now well underway.

This three-year partnership with NASA, valued at approximately $9 million, will advance the VASIMR® engine to a TRL greater than 5, a major step closer to spaceflight. The project will build and demonstrate a fully integrated system, the VX-200SS™ laboratory prototype, by operating continuously at 100 kW for a minimum of 100 hours.

The long duration test under the NextSTEP partnership will thoroughly evaluate the engine’s new proprietary core design and thermal control subsystem. The test will also provide a better estimate for component lifetime. 

Visit Ad Astra Rocket Company at www.adastrarocket.com to find out more about the development of the VASIMR® engine.

Dr. Mark Carter is the Senior Vice President of Technology Development for Ad Astra Rocket Company where he has worked since 2006. The company’s focus is on commercial space applications, especially the development of the VASIMR® engine, and renewable energy storage and generation in Costa Rica.

Prior to joining Ad Astra, Dr. Carter spent over 23 years as part of the research staff at Oak Ridge National Laboratory where his research focused on high-performance computer modeling of plasma processes.  His work contributed to radio frequency coupler designs and analysis for experimental devices around the world as part of an international program for the US Department of Energy. His interest in VASIMR® physics and technology began in the late 1990s as a part of interagency agreements between NASA and the US Department of Energy. 

Dr. Carter received his Ph.D. in Nuclear Engineering with a minor in Physics from the University of Wisconsin at Madison and a B.S. in Nuclear Engineering from the University of Missouri at Rolla.